P2.5 Immersive LED Display: Dome Series for Indoor Spaces
Nov 04,2026
The p2 5 immersive led display from Geshino is part of the GSN-Dome Series. It is an indoor commercial LED display with a fixed installation. The screen uses a dome shape and an ultra-wide-angle fisheye design to create an immersive view. The refresh rate is 3840 Hz, and the pixel options are P2 or P2.5. The module size is 320 x 160 mm, and the cabinet is 640 x 480 mm, with a custom size available.
The dome form is different from a flat wall. A curved LED surface can wrap the viewer in the image, and a fisheye content can use the full field of view. The product page describes a realistic 4D experience, a good three-dimensional effect and a seamless picture. The buyer should confirm the dome radius, the viewing distance and the content format before the order.
Why Choose an Immersive LED Display
An immersive display is used where the screen should be more than a flat panel. A dome, a curved wall or a creative shape can turn a product launch, a museum exhibit or a showroom into an experience. The viewer sees the content from several angles, and the curved surface can fill the peripheral vision. The buyer should match the shape to the room and the content.
For an indoor commercial space, the display should be bright enough for the light level but not harsh. The 3840 Hz refresh helps avoid a visible scan line on camera, which matters for a broadcast or a live stream. The high colour reproduction and the wide chroma support a realistic image. The buyer should test the content on the actual screen, because a photo or a video can look different on a curved surface.
Module, Cabinet and Maintenance
The module is 320 x 160 mm, and the cabinet is 640 x 480 mm. A standard cabinet makes the screen easier to design and service, and a custom size can fit a project. The maintenance can be front or rear, so the buyer should confirm the access behind the screen. A front-service design is useful when the wall has no rear access.
The cabinet should be rigid and the modules should align. A seam or a gap can be visible on a curved screen. The buyer should ask for the flatness and the seam tolerance, and check a sample or a mock-up. The power and the data connection should be planned for the cabinet layout, and the spare modules should be kept for a quick repair.
Brightness, Colour and Content
The screen is described with good brightness uniformity, high contrast and wide chroma. A uniform brightness is important on a curved surface, because a bright or a dark patch is easy to see. The buyer should ask for the brightness and the colour calibration report. A calibration for the actual content can improve the result.
The content should be produced for the dome geometry. A standard video can be stretched or cropped, and the result can look wrong. The buyer should ask the content team to use a fisheye or a dome mapping. The screen should be tested with the final media, and the brightness and the colour should be adjusted for the room.
Installation and Project Support
A dome screen is a project item. The structure, the rigging and the service access should be designed with the screen. The buyer should provide the room drawing, the viewing area and the content plan. Geshino can confirm the cabinet, the module and the control system. A site survey is the best way to avoid a problem at the installation.
The control system should support the resolution and the shape. The buyer should confirm the video processor, the sending card and the backup. A large screen may need a redundant power and a signal backup. The buyer should ask for the commissioning plan and the training for the operator. A screen that is installed without a proper calibration can lose the immersive effect.
Ordering and Warranty
For a quotation, send the dome size, the radius, the pixel pitch, the viewing distance, the content format and the destination to Geshino. The team can confirm the module, the cabinet, the processor and the delivery schedule. The buyer should ask for the warranty, the spare parts and the service response time. A project screen should have a clear support plan.
Before the bulk order, a sample module or a small mock-up is a practical way to check the colour, the seam and the dome shape. The buyer should keep a reference and compare the production lot. The p2 5 immersive led display is a focused product for an indoor commercial project, and the final specification should be checked against the room and the content.
PREVIOUS:
Contact Us
Related Posts
The Impact of LED Advertising Signs on Consumer Engagement
Address：
Building D,Hongfa Technology Industrial Park, shiyan Town,baoan District,Shenzhen,China.
Message